|Give me a Sign!
(or Options of the Shape Tools)
will explore the options of the shape tools and get some practice with
using the shape tools through a few little projects, making some common US
-> New.. and make it pretty large, like 1000 pixels square. File ->
Save as .. and make it psd format and name it givemeasign.psd. You will
need to change later to a JPG file
of the steps in this tutorial work fine with Photoshop Elements 2, as
well as with Photoshop versions 6+. There is one part in the Stop sign
where your directions will be different if you are using Elements. Look
for the blue box!
start with stop.
Make the red octagon. In order to do this, you have to tell PS exactly
what you want: a red, 8-sided polygon which has the path with it. (This is
called a shape layer.)
your shape tool and then choose Polygon from the options.
the options bar, just to the right of your geometry options, there is
an arrow. Click that and make sure that there are no boxes checked.
Click the arrow again to turn off that box.
it says "sides," put an 8 in there.
the Shape Layer button to the left in the Options bar.
red for your foreground color.
put your cursor on the canvas and drag out an octagon. Make it bigger
than you think you need. As you drag, notice that you can angle it
however you want. (If you hold the Shift key here, what happens to
your orientation?) Before you release your mouse, line up the octagon
so that the top bar is perfectly horizontal.
Make the white line. Now we are going to take the path that is around the
red octagon and use it to make the white line around the inner rim. We
could make a new path, but by using the old one and transforming it, we
will make sure to get the exact angles. First we need to duplicate the
Layer clipping path. Here's how:
your red octagon layer so that it is active.
click the Paths palette and then drag the Shape 1 Clipping path (In v.
7, it is called Shape 1 Vector Mask,) to the New Path icon to
Elements Users: You knew that there was a reason that Photoshop is
$600 and Elements is $99. Well.. one them is that you don't have the
Paths palette. Therefore, you have to come up with a different way to do
this white octagonal outline. Here's an outline of one way to do it:
a smaller white Octagon and move it to the center of the red one.
a red octagon which is smaller yet and center it inside the white
you have your white octagon and the center red one, skip down to
the Shape tool (or any other path tool) in the toolbox. Now Ctrl-T
will bring up your Free Transform Path box. Now you are going to drag
this path inward till it is where you want your white to be.
the Shift and Alt keys whilst you are dragging (and hold them down
till after you release your mouse). (Shift keeps the proportions
intact and Alt makes the transformation stay centered.) Click Enter to
transform your path.
Sometimes, inexplicably, the whole red octagon will get smaller, instead
of just the path. If this happens, hit Esc and then go to Edit > Free
Transform Path... and work from there.
on the Layers tab to bring back the Layers palette. Make a new layer
by clicking on the New Layer icon in the Layers Palette.
white for your foreground color.
your paintbrush and choose the width of hard-edged (dot) brush that
you want your white line to be. (In v. 7, click the brushes palette to
be sure that you have no brush dynamics set.)
see that little button at the bottom of the Paths Palette that is
colored in.. and then there is one next to it that is NOT colored in.
Push the one that is not colored in. That is the "Stroke
Path" button. It will go around your path with whatever brush you
last picked in whatever color onto whatever layer you had selected in
your layers palette!
in your paths palette below your path in an empty space to make your
If you last used some other tool than a brush, your stroke will be a nasty
jaggy black line. If this happens, Ctrl-Z to undo and then choose a brush
and do again.
thing: If you forgot to make yourself a new layer or if you don't have the
layer selected in your layers palette, it can't stroke the path just into
the air, so the stroke button will be grayed out.
Make the lettering.
a better font than I did to do the Lettering.
finally... Ctrl-S to save. (Yes, I know that i'm fanatical about saving.
As you get more into this, you will be happy if you are in the habit of
saving early and often. I hope to help instill this habit in you. :))
let's look at that One Way sign. There are a couple of things to point out
about this. First, I did this as two rounded rectangles. First I did the
black one, then i did the white one, a bit smaller, inside it. The
"ONE WAY" is a text layer, and the arrow is a shape all its
own. You can do this as a separate file if you want, or you can add a
layer and do it in your stop sign file.
the black rectangle.
on the shape tool and choose the Rounded Rectangle in the options bar.
(This is a thing for which people who have had earlier versions had a
deeply-felt need. And now we have it! YAY!)
looking at that options bar, when you chose rounded rectangle, you got
a choice of Radius (see above). This refers to the pixel radius of the
corners of your rectangle. Put in a few different numbers there and
try it out if you like. I used 5 pixels for my sign.
you need to choose from the three kinds of shapes. Do we want a Shape
Layer with the path? Eh.. we don't really need that for this project,
so let's just use the Filled Region.
black in your color picker and make a new layer.
drag out your rounded rectangle.
the inner white rounded rectangle.
a new layer, choose white for your foreground colour, and pull it out
just as you did for the black one.
now here is another cool thing. You can make an arrow out of the Line
tool! The line tool in PS6 or 7 is in with the shape tools because you can
do it as either a vector object or a raster object, the same as the other
your line tool from the tool bar and then look at your options bar.
Again, we don't really need to be able to edit a path for this, so
let's use "Create a Filled Region."
in the Option Bar, next to the line tool is the Custom Shape Tool.
Then to the right of that is an arrow. Push that arrow and you will
see the "Arrowheads" box like the one to the right. You can
choose where you want your arrowheads, on the beginning of your stroke
or on the end. The width and length refer to the size of the arrowhead
compared to the width of the stem of your arrow.
choose the weight of your arrow in the options bar. This refers to how
many pixels wide you want the line to be. I made mine 10 pixels wide.
Make a new layer. Choose a color. Drag out your arrow.
we are down to the sign's message. Choose a font and have at it!
will leave the Railroad Crossing and Yield signs to you to
experiment and figure out. I'll give you some hints, though :)
i did the rounded corners on the white inner triangle for the Yield sign,
I made a little circle with the elliptical marquee (hold shift to keep it
circular) and then did Select -> Inverse. This makes a selection of
everything BUT that little tiny circle. Then I took a little eraser and
erased that point.
the X in the Railroad Crossing sign:
the line tool and black for the Foreground color.
the Shift key (constrains angle to a multiple of 45°) while dragging
out the lines on a separate layer. I made them too long..
center the x in the middle before trimming off the ends.